Q-See QCN8001D Manuel d'utilisateur télécharger pdf (Page 40)

78 79

CONNECTING TO THE CAMERA

Before you can begin to monitor the camera, you must ﬁrst connect to it.

STEP 1. Click on the blue Full Menu

icon to the right of the Setting

Manage button in the Tool Bar on

the right side of the display.

STEP 2. Select Device Manage to open

the Device Manage window.

STEP 3. Click the Add button and enter

the camera’s IP address (Section

2.3) or DDNS address (obtained in

Section 2.5), port number, your

user name and password (which are

the same that you use to log into the

camera directly). You can also give

the camera an identifying name and

you can add a note in the Description

ﬁeld.

You can also add other types of

devices such as a network backup

storage drive using this window.

Leave Login Type at its default

Network Type TCP setting.

You can return to this window to

update your passwords, add or

remove other devices and make

network access changes if need be.

A prompt will pop up at the bottom

right of the screen to indicate that

the camera has been added to the

program.

PICTURE 4-8

PICTURE 4-9

PICTURE 4-10

PICTURE 4-11

PICTURE 4-12

Step 4. The camera will now appear in

the Device List at the top of the

Tool Bar. Click on the device name

to expand the listing and you can add

cameras.

STEP 5. Choose the screen view format

you wish to use and then click on

the segment of the screen where

you want to place the ﬁrst camera.

Then, click on the camera number in

the Device List to add that camera.

Repeat by selecting a new area.

The area highlighted in green is the

current camera view. Clicking on a

camera icon while a camera view is

highlighted will replace that view with

the channel you just selected.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Q-See QCN8001D Manuel d'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Q-See QCN8001D