Q-See QSC13212D Manuel

QSC13212D Hi-Resolution CCD Color Camera With 2.8 to 12MM Varifocal Lens And Built-in On Screen Display OPERATION MANUAL

6 7. Loosen the screws on both sides with a screwdriver 8. Twist the top to change the left/right angle of the lens

7 9. Top screw adjusts focus, bottom screw adjusts lens size. 10. Cover of cable pull out hole

8 11. You can remove the cover with a coin 12. Pull cable through the hole

9 13. Place cable in channel and through side hole 14. Cable through the hole

10 15. Connector for portable video tester if needed by the installer, the black button is for operating OSD (On Screen Display). 4. Circuit Board

11 4.2 On Screen Display Switch ENTER Press to Enter or Exit the menu UP/DOWN Tilt toward UP and DOWN to move up and down in menu LEFT

12 5.1 Exposure When the cursor stops on "exposure", press “Ok” button to enter "exposure" to set the parameters.  Len

13 5.2 Color Move the cursor to "RGB" icon, click "OK" to enter the White Balance menu to set relevant parameters.  W

14 5.3 Day & Night Switch Day & Night Switch is specially designed for different occasions. There are four kinds of modes as follows:

15  CDS Control The filter switch will be controlled by the photocell, and it can work only in external control mode. 5.4 Function 

Thank you for purchasing our products. Please read the manual carefully before using and keep it for future reference. W A R N I N G To reduc

16  Wide Dynamic Compensation This is digital wide dynamic function, you can adjust its value in order to achieve the best results, the values ar

17 5.7 Camera ID (This camera does not use this feature) Used for setting the camera's address, communication protocol and baud rate.

18 Move the cursor to the input column, press "OK"-the cursor will be moved to the above input character column, after selecting character

19 6. Technical Specifications Function QSC13212D Dome Camera General Functions Imaging Sensor 1 / 3" SUPER HAD ‖ hi-sensitivity CCD & DSP

20 Wide dynamic compensation 60dB, 80dB, 100dB optional AWB Manual / Auto / Auto Tracking Mirror On/Off Sharpness adjustment 0～50 adjustable Gamma

21 7. FAQs 1. Q: No image after installation? A: a. Check the power supply connections, try plugging into different surge protector and a different

22 Please contact us using the following methods with questions about your Q-See product. Q-See Products 8015 E. Crystal Dr. Anaheim, CA 92807

23 Q-See Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware

24 The material in this document is the intellectual property of our company. No part of this manual may be reproduced, copied, translated, transmitt

25 Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Se

Notes 1. Avoid strong impact and stay away from strong electromagnetic interference and vibration. 2. There are some sophisticated parts insi

Directory 1. Features ·································································································· 1 2. Dimensions and Access

1 1. Features 1. New Generation SONY CCD Adopting the latest Second-generation high-sensitive CCD, it can receive clear and lucid images even wit

2 2. Dimensions and Accessories Dome Camera Dome Camera 2.2 Accessories Item Accessories Quantity Re

3 3. Installation 1. Release screws to open the cover 2. Use the pictured tool to take off the screws

4 3. Open the cover 4. Arrows point to the 3 holes for ceiling mount screws

5 5. Mounting the base to ceiling 6. Screws for changing the angle of the lens