Q-See QCN8001D Manuel d'utilisateur télécharger pdf (Page 33)

64 65

SMTP (E-MAIL)

The camera can send out its own e-mail alerts - with snapshot attachments. If the camera is

connected remotely to an NVR, these e-mails will be in addition to those that the NVR creates.

The camera’s e-mail address should therefore be different than that used for the NVR to avoid

confusion.

NOTE! Depending upon your settings, the system can generate a lot of e-mail

alerts. For that reason, we recommend setting up a dedicated e-mail address

speciﬁcally for the system to send alert notices. If you do not have your own

e-mail system (such as a corporate mail server) you should consider using a

free e-mail provider. However, because many free e-mail services allow only a

limited amount of e-mail trafﬁc we speciﬁcally recommend using Google’s Gmail service with

its higher limit. Similarly, you will want the alert e-mails to go to a different account than the

one sending them. This will ease your management of these alerts.

PICTURE 3-10

SMTP Server – This the SMTP server IP

name

Port – This is the port your mail provider uses

User Name and Password – These are for

the sending e-mail address and were

set up when you created the e-mail

account.

Title – This is the subject line of e-mails

generated by this NVR.

Receiver – This is the recipient e-mail

account.

Attachment – This allows the e-mail to

include one or more snapshots as

attachments

SSL Enable – The system supports SSL encryption when this is enabled.

Interval – This adjusts the amount of time that will pass before the NVR sends out another

e-mail. The interval can be set from 0 seconds to ten hours (3600 seconds). If you are

getting too many e-mails, you may wish to increase the length of the interval. Using

this feature also helps prevent overloading your outgoing e-mail server.

UPNP (UNIVERSAL PLUG ‘N’ PLAY)

As described in Section 2.4, UPnP allows networked devices to communicate with each

other. UPnP, like DHCP, allows the router to assign the camera an IP address on its network.

and will automatically forward the ports for outside communication. In addition to the HTTP

(port 85) and TCP (port 37777) communications protocols, UDP and RTSP allow the camera

to stream data and communicate with other devices.

BONJOUR

Bonjour is Apple Inc.’s version of UPnP to enable easy network connectivity.

3.4 EVENT

Like your NVR, your IP camera can detect motion events and when it is being blocked

or masked. You can conﬁgure these features on your camera in the same manner as on

your NVR and alerts can be e-mailed and/or alarms triggered. Using these features on the

IP Camera would not interfere with the operations on the NVR and some users prefer the

duplication of event detection as a backup in case the NVR is affected.

PICTURE 3-11

PICTURE 3-12

MOTION DETECTION

Clicking on Setup next to Working Period

will open up a schedule allowing you to set

the periods when the camera will actively

detect motion events. You can set six periods

each day for the camera to be “on alert” using

the start and stop times at the bottom. Click

Save to preserve your changes and they will

appear on the schedule when you next open

the window.

The operation and setup of these event monitoring is identical to that on the NVR itself. See

Section 3.7 of the User Manual for full explanations.

You can enable a motion alert to trigger several one or more events - video recording, e-mail

alerts and snapshot images. Videos and snapshots are sent to an FTP site - which must be

set up by the user. Some camera models allow the insertion of a Micro SD ﬂash memory

chip which can be used to store these images “onboard” the camera for retrieval using the

PSS software. Video recording is controlled by the Recording Schedule (see following

pages) which overrides the settings here. If the camera is set to record on motion detection,

those recordings will only take place during the time period(s) conﬁgured in the Recording

Schedule.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Q-See QCN8001D Manuel d'utilisateur Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Q-See QCN8001D