Q-See QT446 Manuel d'utilisateur télécharger pdf (Page 30)

3.3 LIVE VIEWING AND RECORDING

SWITCHING VIDEO OUTPUT

As described in Section 2.4 Video Display, the NVR is normally conﬁgured to output video

signal to a 19” or larger monitor through the VGA port on the back.

LIVE VIEWING

The normal mode of the NVR is to display the live feed from the cameras. Conﬁguring which

channels will be displayed, naming the cameras and other display settings will be covered in

SECTION 4.2.

PICTURE 3-8

Symbol Meaning Symbol Meaning Symbol Meaning

Scheduled

Recording

Alarm

Recording

Manual

Recording

Motion Detection

Audio Enabled

In addition to the camera images, the NVR will display symbols regarding the status of each

camera

RECORDING

Your NVR is conﬁgured to record whenever motion is detected. It is also set to record at the

best setting possible. These settings work for most users, but each user’s situation will be

different and directions for adjusting these settings can be found in Section 4.3 Record

Configuration.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

Pas de commentaire

Q-See QT446 Manuel d'utilisateur Page 30