Q-See QC8116 Manuel de service télécharger pdf (Page 8)

14 15

Single Screen 4 Screens 8 Screens

9 Screens 16 Screens

2.4 LIVE VIEW

Live View is the default mode for your NVR. It will display the video feeds from your cameras - either a

single channel, or from multiples. You do not need to be logged in to view or change channels.

IMPORTANT! It is highly recommended that you change your system

password after you complete the setup of your system to ensure the security

of your system. Record your changes and keep that information stored

securely as the system will prevent access if the incorrect login information

is attempted three times within a 30-minute period. If you ﬁnd yourself locked

out of the NVR because of this, wait 30 minutes, reboot the NVR and attempt

to log into it again.

PICTURE 2-4

PICTURE 2-5

The number of channels that can be displayed at once depends on the capacity of your NVR. For

instance, if you have a four-channel system, the viewing options will be limited to single- or four-screen

modes.

Clicking on any one screen in multi-view mode will bring that screen to full-screen single-view mode. The

exception is in eight-view where clicking on one of the smaller displays will move it to the larger display.

You can also drag channels to a different position on the screen with the displaced channel relocating to

the position of the one that was moved.

For your protection, the NVR will log you out after

a period of inactivity. To make any changes to your

system, or to view recorded video, you will need to

log back in. Use the mouse to select your account

from the pull-down and then to “push” the keys

on the Virtual Keyboard to enter your password.

Click Enter to submit the password and exit the

keyboard.

Until new accounts are added, there are two pre-conﬁgured accounts available to users who log into the

NVR:

• Administrator(localandnetwork)Username:admin Password admin

• Usernameuser Password user

The Admin account cannot be deleted, but you can - and should - change the password. After all,

anyone who reads this manual would know your password, right?

SHORTCUT MENU

In Live View mode, right-clicking anywhere on the screen will bring up the pop-up Shortcut Menu

Shortcut Menu.

This menu allows you to quickly change your viewing mode as well as moving directly to a selection of

menus, including the Main Menu.

View - This allows you to view a group of

cameras on screen at the same time. The number

of cameras available will depend on how many

cameras your NVR will support. The arrows to the

right of the view options will allow you to select

speciﬁc cameras.

PTZ (Pan/Tilt/Zoom) - This will take you

directly to the PTZ Control Window The controls

will only work with PTZ cameras.

Auto Focus - This option will only work with

cameras equipped with auto focus. This feature is

not available on all models.

Color Settings - You can adjust the camera’s

brightness, color balance, contrast and other

aspects to best suit its operating environment.

These changes can be made using the sliders or

by selecting a pre-generated color mode.

Search - This opens the Search and Playback

Window (See Section 3.1).

Override - This allows you to quickly change the

recording status of your cameras.

Tour - This will cause Live View to cycle through

your channels. This can be set up in Displays

(See Section 4.5).

Remote Device - This opens the Remote

Device window which allows you to access IP

cameras which are located on a different network

from your NVR. (See Section 4.1).

Main Menu - This opens the Main Menu.

PICTURE 2-6

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 42 43

Commentaires sur ces manuels

Pas de commentaire

Q-See QC8116 Manuel de service Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Q-See QC8116