Q-See QC8116 Manuel de service télécharger pdf (Page 31)

60 61

Network Time Protocol–ThisallowsyourNVRtousethesametimeserverthatyourcomputerdoesto

adjust its internal clock.

•Youcanalsouseanotherserverifdesired.Simplyentertheserver’saddressandthecorrectport.

•ClickApply to test your settings.

•ClickSave before exiting this window to preserve your changes.

4.5 SYSTEM

Settings in this menu control the basic operations of the NVR itself. Among the other options, you can

make changes to settings you made when you ﬁrst set up your system.

PICTURE 4-40

GENERAL SETTINGS

General

Device ID–Yournameforyourrecorder.

Device No. –IfyouarecontrollingmorethanoneNVRwithasingleremote,thisallowsyoutogiveeach

NVR a separate numerical ID.

Language–QCNVRscanorwillsupportEnglish,SpanishorFrench.Thesystemwillneedtobe

restarted for the language change to take effect.

Video Standard–Bydefault,thisNVRoperatesusingtheNTSCstandardcommontoNorthAmerica.

Video output can be switched to PAL for areas where that is used.

NVR Full–Aftersomeperiodoftime,yourharddrivewillllupwithrecordedles.TheNVRwill

overwrite old ﬁles with newer ones when this occurs. The other setting is for the NVR to stop

recording when the drive is full.

Pack Duration–Ratherthancreating24-hourlongleswhenachannelissettorecordallthetime,this

allows you to set the maximum record length up to two hours).

Realtime Play –Thissetstheduration(uptoanhour)ofthevideoclipthatwillplaywhentheRealtime

Play icon is clicked (See Section 2.4 Live View).

Auto Logout –Likeyourcomputer,yourNVRwilllogoutauserafteraperiodofinactivity-upto60

minutes in this case.

IPC Time Sync–Synchronizesremotecameras’clockswiththeNVR.

Navigation Bar/Startup Wizard–Uncheckingtheseboxesdisablesthatfeature.TheStartupWizard

should be disabled after you successfully set up your NVR.

Mouse Sensitivity–Adjustthemousespeedtoyourpreference.

PICTURE 4-41

PICTURE 4-42

PICTURE 4-43

Date & Time

As the name implies, this window is for setting the

date and time on your system. This is important

to ensure the ability to use your recordings as

evidence.

Date Format–Chooseyourpreferedformat.

Time Format–AM/PMor24-Hourformat.

Date Separator–Period,dashorslash.

System Time/Time Zone–Setthecurrentdate,

time and time zone. Click Save.

Daylight Savings Time–Setthedateorweek

of the month that DST starts and ends

for your area. If you do not have DST,

uncheck the box.

Holiday

•Addingholidaystoyour NVR’s internal calendar

will add a holiday schedule option to the

Camera > Rec Settings window (Section

4.1).

•Holidayrecordscheduleswilloverridethe

normal daily recording schedule.

1. Click on Add Holidays.

2. In the Add Holidays window:

•EntertheHolidayName

•Selectwhetherit’saone-timeeventor

happens every year.

•Selectwhetherit’saspecicdate(like

Christmas) or a speciﬁc week of the month

(like Thanksgiving).

•Setthestartandendtimes.

3. If you want to add more than one holiday, check

the box marked Add More.

4. Click Add to add your date to the calendar.

5. Click Save to exit the window.

6. Click Save in the Holiday window before

exiting.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Commentaires sur ces manuels

Pas de commentaire

Q-See QC8116 Manuel de service Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Q-See QC8116