Q-See QSDR16RTC/B Manuel d'utilisateur télécharger pdf (Page 36)

QSDR16RTCB User Manual

(Picture 71)

(Picture 70)

Chapter 6: Net-Viewer Program

6.1: Enable Plug-Ins and Log-In to Net-Viewer

Refer to Section 5.2.3.5 to ensure that your pop-up blockers are

turned off and your ActiveX is enabled prior to running the

Net-Viewer program. Once you have disabled your pop-up block

option and enabled ActiveX, open an IE Browser window and input

the IP address and web port of your DVR (i.e., http://172.18.6.202/

)

into the address bar. This will generate a Net-Viewer log in screen

(Picture 70) prompting you to input the necessary information

required to view a live video feed from your DVR system. If you are

experiencing difficulties initiating the log in screen, make sure your

browser’s safety level or firewall settings are not set too high. Refer

to section 5.2.3 Network Setup to ensure that your network configuration is correct, your system ports are forwarded

correctly and ActiveX is enabled. Once you have entered in the correct information, you will be able to view your DVR

remotely through the Net-Viewer program and you will see a live feed similar to the one depicted in Picture 71.

6.2: Main Interface of Net-Viewer

Refer to Section 6.3.2 for a more detailed description of the actions associated with the specific buttons of the

Net-Viewer illustrated above (Picture 71). However, a general description of the buttons is as follows:

1 – Menu Bar

2 – PTZ Panning Options

3 Through 4 – PTZ View Options

5 Through 9 – Live Play Controls

(Picture 71)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 45 46

Pas de commentaire

Q-See QSDR16RTC/B Manuel d'utilisateur Page 36