Q-See QSDR16RTC/B Manuel d'utilisateur télécharger pdf (Page 11)

QSDR16RTCB User Manual

Chapter 3: DVR Installation

3.1: Hard Drive Installation

Caution： NEVER Install or remove the hard drive while the DVR is running!

The model has a Hard Disk Drive (HDD) drawer. Please use key provided to open the drawer and insert the HDD

as follows:

(1) Remove screws and open DVR upper cover carefully;

(2) Insert Power Cord and data cable securely into matching ports on hard drive;

(3) Put the upper cover back carefully, re-attach screws.

3.2: Connecting Your DVR to Cameras and a Monitor

Connect camera cable to the Video Input port of the DVR. Connect the monitor to the Video Output port of the DVR

using a BNC connector (See Rear Panel Section 2.2).

To connect a PTZ speed dome to your DVR System, connect your PTZ Camera data cables to your RS485 A & B

ports. See Chapter 5 for a more detailed account of PTZ Camera configuration instructions.

3.3: Connecting the Power Supply

Only use the power adapter supplied with your DVR System. Failure to do so may result in unforeseen system

failures.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Pas de commentaire

Q-See QSDR16RTC/B Manuel d'utilisateur Page 11