Q-see Computer Hardware Manuel d'utilisateur télécharger pdf (Page 74)

Error! Use the Home tab to apply

标题

1 to the text that you want to

appear here. Error! Use the Home

tab to apply

标题

1 to the text that

you want to appear here.

SuperDVR & H.264 Series Cards

User Manual

The Alarm setup configuration is show below:

Fig 7.22 Alarm triggering configuration

Option Explanations:

1. Buzzer

Users can select whether to sound the computer buzzer if the alarms have

been triggered also select how long the buzzer sounds.

2. Full screen alarm

Users can select whether channel will be full screen when alarm triggered.

Set the full screen hold time here

3. Pre-alarm record

Users can select whether to enable alarm pre-recording and also pre-record

time

This option is for users to see remote live view.

4. Disk storage alarm

If the Partition’s free space is less than the assigned percentage, it will stop

recording or recycling, but give alarm tips according to the settings

5. Motion holding time

The continuous recording time after motion stopped

6. Sensor holding time

The continuous recording time after sensor stopped

7.5.2 Camera setup

Click

and the camera setup configuration will appear as shown below:

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 103 104

Pas de commentaire

Q-see Computer Hardware Manuel d'utilisateur Page 74