
14 15
STEP 5. To view your DVRs, click on the
Live button at the lower right of the
Operation Interface.
STEP 6. You will see your connected
devices listed to the left of the viewing
window. You can drag and drop the
DVR’s icon onto the blank Operation
Interface window to open the feeds
from the attached cameras.
CHANNEL GROUPS
Channel groups are any collection of channels that you have grouped together for your
convenience. They can be selected channels from one DVR or a few channels from multiple
systems.
Channel groups are set up in the Device Manager console after you’ve added systems to
the Device List. Again, there is a 32-character limit for names.
Add
Group
Modify
Group
Delete Dwell
Setup
STEP 1. Click on the Add Group icon
STEP 2. Enter the name of your group and click OK.
STEP 3. With the channel group’s icon highlighted, click on an available camera in the
Device List and then press the >> button in the middle to add that camera to the
group.
Add Group - Creates a new channel group
Modify Group - Change the group’s name.
Delete - Remove a channel group from the list
Dwell Setup - Set the time that the system will display a channel group (between 5
seconds and 2 minutes) before moving to the next channel group.
If you have multiple groups and you want
CMS to automatically switch between
them, then you will need to set up the time
delay between groups using Dwell Setup.
Otherwise, you can manually switch using
the Previous Group and Next Group
buttons (items 16 in Section 2.3).
You will need to place a check mark before
each group you want to cycle through. And,
you are able to individually set the dwell
time of each group from five seconds to two
minutes.
Commentaires sur ces manuels