Q-See QSD9004 series Manuel d'utilisateur télécharger pdf (Page 10)

User Manual

Chapter 3: DVR Installation

3.1 Hard Drive Installation

Caution： Please do not Install or take out hard drive when DVR is running!

(1) Remove screws and open DVR upper cover carefully;

(2) Insert Power Cord and data cable into Pin of hard drive securely;

(3) Put the upper cover back carefully, re-attach screws.

3.2 Camera and Monitor Connection

Connect camera cable to video input of DVR, and from video output of DVR to Monitor via BNC

connector (Refer to section2.2-Rear Panel); or

If the camera is a PTZ speed dome, you could connect RS485 A & B to the according port of DVR

respectively (refer to system figuration on Chapter 8).

3.3 Power Supply connection

Please only use the power adapter supplied with the DVR .

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Pas de commentaire

Q-See QSD9004 series Manuel d'utilisateur Page 10