Q-See QSD42908 Net Manuel d'utilisateur télécharger pdf (Page 57)

QSD42908C8 User’s Manual

5.13 External Alarm Input and Relay Output

For QSD42908 there are 16 alarm in and 4 relay out ports. In “Alarms” menu, you can setup

each external alarm input.

In main menu, move the “Active Frame” to “Alarms” icon and press【ENTER】key to enter

into alarms menu as shown in fig 5.22

5.22 Alarms setup

External alarm input setup:

Step 1: Select one alarm input Use【↑】【↓】keys to select one alarm input.

Step 2: Alarm type

This is the sensor type. You can select “Normal Open” or “Normal Close” according to the

sensor type.

Step 3: Enter into “Alarm in Handling” sub menu

In the “Alarms” menu, there are two options for “Alarm Handling”. One is “Ignore”, and

the other is “Handle”. If you select the “Handle” option, you can activate “Policy” and “PTZ

Linkage” buttons on the right side. Move the “Active Frame” to the “Policy” button and press

【ENTER】key, you will enter into “Alarm in Handling” sub menu as shown in fig 5.23

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 100 101

Pas de commentaire

Q-See QSD42908 Net Manuel d'utilisateur Page 57