Q-see QSDB8209C Manuel d'utilisateur

QSDB8209C Digital LCD Baby Monitor and Wireless Camera Visit Us on the Web at http://www.q-see.com Rev 072208

5. Specifications Item Value GENERALTransmission Frequency ISM 2,400~2,483 MHzTransmission Power 10mW/CE; 2mW/FCCOperating Frequency 2414MHz;2432MHz;

* Actual transmission range may vary according to weather, Location, interference and building construction. * All the specifications are su

EU Environmental Protection Electrical waste products (discharged batteries) should not be disposed of with household wast

Digital Peripheral Solutions Inc. 8015 E Crystal Drive. Anaheim, CA 92807 1-877-998-3440. Q-See Tech Support in U.S.A. Mon-Fri: 9 am 5 pm PST. TEL:

ContentsContentsContentsContents 1 Packing List 2 Diagram 3 Structure 4 Installation 5 Specifications 6 FCC and EU

2. Diagram 3. Structure 3-1. Layout of Camera

3-2. Layout of Receiver 4. Installation 4-1. Setting Up the Camera 1. Setup the camera in the desired location

2. Connect the camera to the adapter and then slide the power switch to the ON position Note: --This camera can also use dry batteries as

4-1-1. Camera Learning Setup If there is interference from another wireless device the Learning Switch can program the unit to avoid it. Pu

Sound Alarm Setup: To set up the sound alarm slide the alarm switch to the VOX position. The system will enter standby mode until a soun

Note: --This receiver can also use dry batteries as a power source by loading 4 AA batteries into the battery compartment at the b

3. Set the channel of the receiver to the same channel as the camera by pressing the channel button continuously, the pictures will display on the sc