Q-See QD6505P Manuel d'utilisateur télécharger pdf (Page 8)

14 15

EXAMPLE 1: SETTING A CRUISE

This example is based on using a QT-Series DVR without an attached PTZ keyboard. Your

DVR’s speciﬁc commands may differ slightly. Please consult your system’s manual.

STEP 1. In your DVR’s PTZ settings

window, select the Advanced tab and

then Preset 1.

STEP 2. Rotate the camera to the desired

position using the arrow controls.

STEP 3. Click Save

STEP 4. Select Preset 2.

STEP 5. Rotate camera to desired

second location.

STEP 6. Click Save

You may repeat Steps 4-6 for additional

positions if desired.

STEP 7. Return to the PTZ window and

click on the Cruise button for your

channel.

STEP 8. Click Add.

STEP 9. Double-click on the new cruise

setting to begin loading your presets.

STEP 10. Click on the + button to open

the Preset pop-up window and select

your starting preset point, speed and

stop time.

Speed: 1-8 with 8 being the fastest

Time: This is the time the camera will

stay pointed at this location.

Serial PortSerial Port AdvancedAdvanced

P.T.ZP.T.Z

DefaultDefault

SettingSetting

ApplyApply ExitExit

CH Preset Cruise Track

SaveSave

Zoom

Focus

Iris

Zoom

Focus

Iris

Speed: 5Speed: 5

No.No.

02020101 0303 0404 0505 0606 0707 0808 AllAll

Start TrackStart Track

Start Auto ScanStart Auto Scan

Start CruiseStart Cruise

Preset

Cruise

Preset

Cruise

Speed: 5Speed: 5

preset 101preset 101

02020101 0303 0404 0505 0606 0707 0808 AllAll

Zoom

Focus

Iris

Zoom

Focus

Iris

STEP 11. Repeat for each preset - up to a maximum of 16 per cruise.

STEP 12. Click OK save your settings and close the windows until you reach the PTZ

Settings window. Click Apply to save all of the settings.

STEP 13. Open the PTZ controls from the Control Bar, select your cruise in the pull-down

and click

to begin.

EXAMPLE 2: SETTING A TRACK

An alternate method is to utilize the Track settings - also found in the Advanced tab. Click

the Track button for the right channel, use the directional controls to point the camera at your

desired starting point and then click Start Record. The DVR will then record your movements,

including delays at selected spots. Click Stop Record to end. Clicking on Start Track in the

PTZ control window will start the camera on its track.

TROUBLESHOOTING

Problem Solution

No picture or unstable image Check both the power and video

connections to the camera.

The on-screen image is blurry. 1. Check for ﬁngerprints or dirt on the lens.

2. Check menu settings.

The on-screen image is dim. 1. Check for ﬁngerprints or dirt on the lens.

2. Check monitor settings

The on-screen image is dark. 1. Adjust the monitor contrast settings.

The screen ﬂickers. Camera may be facing sun, television or

computer monitor.

The IR LEDs will not light up 1. Check the power connection to the

camera.

2. Power supply may need to be located

closer to camera.

The camera is not working properly, is hot,

smells or is producing smoke.

DISCONNECT CAMERA FROM POWER

SUPPLY IMMEDIATELY!

1. Check that correct power supply is in use.

2. Send camera out for repair.

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Q-See QD6505P Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Q-See QD6505P