Q-See QSDT16PCRP Guide de l'utilisateur télécharger pdf (Page 3)

STEP 5. Click on CHECK NOW to

detect how many Routers are in the

network.

PICTURE 7

PICTURE 5

PICTURE 6

PART 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK

To ﬁnd out the number of routers on your network, you will need to download a FREE router

detection program.

STEP 1. Go to

http://www.pcwintech.com/shanes-toolbox

STEP 2. Click on Detect Multiple

Routers to begin the download.

STEP 3. Unzip the application to install it.

STEP 4. Click on the detect_routers

application to run it.

If Multiple Routers are Detected

If there are multiple routers, you will see a

display similar to Picture 8.

If so, it may be preferable to connect your

DVR and computer to the router that

connects directly to the Internet. However, this

is not always possible depending upon your

particular situation.

STEP 6. If there is only one router detected, then you may skip to Part 3: Simple Port

Forwarding.

PICTURE 8

In this case, you will need to proceed with the next section using the IP address for Router 1

to forward its ports. After that, you will need to proceed to Part 4.

1 2 3 4 5 6 7 8 ... 12 13

Pas de commentaire

Q-See QSDT16PCRP Guide de l'utilisateur Page 3