Q-See QC-SERIES Manuel d'utilisateur télécharger pdf (Page 14)

26 27

BASIC OPERATION

CHAPTER 4

This chapter is intended to help you get your DVR up and running before you activate any

advanced features which are covered in later chapters. You can use the mouse, remote

control and the buttons on the front of the DVR to operate your system, but for convenience,

we will be discussing operations using the mouse.

4.1 POWER ON/OFF

Connect the power cable to the DC power port on the rear panel. It will power up when

connected to a power source.

At startup, the system performs a basic system check and runs an initial loading sequence.

After a few moments, the system loads a live display view.

STANDBY MODE

The system can be put into Standby Mode. Power will remain to the system but will not be

recording. This is done through the Maintenance window and will be covered at the end of

Chapter 5 you will need to push and hold the Standby button on the remote to resume use

of the DVR.

SHUTDOWN

When the DVR will not be in use for an extended period of time, it is recommended that you

shut it down completely. To do so, you will ﬁrst need to put it into standby mode which is

located in the Maintenance menu. This will stop recording and idle the hard drive. Once the

DVR has gone into standby, turn off the power - preferably by turning off the surge protector

that it is plugged into.

IMPORTANT! To protect your system, you should always power down the

DVR as described above before unplugging it or using the power switch.

PICTURE 4-1

The default user name is admin and the password is blank (no password). Just click

Apply Once you have completed setting up your DVR, it is highly recommended to enable

passwords on the system using the Password menu in order to secure your system.

4.3 CONTROL BAR

The Control Bar gives direct access to many of the system’s functions, features and options

without having to go through a series of intermediate steps. It appears at the bottom of the

screen and can be hidden or revealed by right-clicking the mouse. It will disappear when a

menu is opened and reappear after all menus are closed.

4.2 SYSTEM LOGIN

By default, the DVR will display the live video from one or more cameras after starting up. In

order to access the features, including playback of recorded video, you will need to log into

the system.

PICTURE 4-2

The Login window will appear whenever a

user attempts to access the DVR while not

being currently logged in - whether to an

extended period of inactivity or by having

previously logged out.

By default, passwords are disabled on

the system. You do not need to enter a

password when accessing any system

menus. This is done as a convenience to

assist in setting up your system.

Start Opens the Main

Single

Screen

Select a single

channel to view

Multi-

Channel

View(s)

View multiple

channels on-screen

at the same time.

The number of

options varies by

model.

Color

Adjust

Adjust the

appearance of the

video on the screen.

This does not affect

the recorded video.

Digital

Zoom

Digitally enlarge a

section of the video

Volume Adjust volume

(requires audio

source)

PTZ

Controls

Opens PTZ camera

controls

Record Starts and stops

manual recording

Playback Opens the video

search and

playback window

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Commentaires sur ces manuels

Pas de commentaire

Q-See QC-SERIES Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Q-See QC-SERIES