Q-See QSTD2408 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Enregistreurs vidéo numériques (DVR) Q-See QSTD2408. Q-See QSTD2408 User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer

Résumé du contenu

Page 1 - User’s Manual

QSTD2400 Series DVR User’s Manual i QSTD2404/QSTD2408/QSTD2416 Digital Video Recorders User’s Manual For H.264-4-channel/ 8-channel/1

Page 2 - CAUTION

Digital Video Recorder User Manual 6 The Rear Panel Layout for 16 Channel DVR is shown as Fig 2.4 Rear 16Ch. Fig 2.5 Rear Panel for 16-channel

Page 3 - Table of Contents

QSTD2400 Series DVR User’s Manual 7 The Rear Panel Layout for 4 Channel DVR is shown as Fig 2.4 Rear 4Ch. Fig 2.6 Rear Panel for 4-channel

Page 4

Digital Video Recorder User Manual 8 2.3.2 Installing Sensor Alarm The DVR has 4, 8, or 16 channel alarm input (depending on model) and

Page 5 - Introduction

QSTD2400 Series DVR User’s Manual 9 2.4 Remote Control The remote control uses two AAA size batteries and works after loading batteries as follows: S

Page 6

Digital Video Recorder User Manual 10 2.5 Controlling with Mouse 2.5.1 Connect Mouse DVR supports PS/2 or USB mouse through the ports on the rear pa

Page 7 - Hardware Installation

QSTD2400 Series DVR User’s Manual 11 CHAPTER 3 Basic Operating Instructions 3.1 Power On/Off Notice: Before you power on the unit, please make sure

Page 8 - 2.2 Front Panel

Digital Video Recorder User Manual 12 Symbol Meaning Symbol Meaning Audio enabled in live mode Audio disabled in live mode (green) Manual recordi

Page 9 - 2.3 Rear Panel

QSTD2400 Series DVR User’s Manual 13 3.2 Login & User Management Users can logout and login to the DVR system. Users cannot do any other operatio

Page 10

Digital Video Recorder User Manual 14 Add & Delete users: This unit has a default administrator and two user groups, advanced and normal user. It

Page 11

QSTD2400 Series DVR User’s Manual 15 3.3 Recording 3.3.1 Record Setup Users need to install and format a HDD, unless the unit came with a hard drive

Page 12 - Alarm output:

QSTD2400 Series DVR User’s Manual ii CAUTION  Please read this user’s manual carefully to ensure that you use the device correctly and safely.  This

Page 13 - 2.4 Remote Control

Digital Video Recorder User Manual 16 3.3.2 Manual Recording Just press the REC button on the front panel after exiting system setup. Press the Sto

Page 14 - 2.5 Controlling with Mouse

QSTD2400 Series DVR User’s Manual 17 3.3.4 Motion Detection Recording This unit supports recording channels and PTZ linking. This means it will recor

Page 15 - Instructions

Digital Video Recorder User Manual 18 STEP4 Select alarm out and recording channels. It can trigger any alarm out and cameras to record once motion i

Page 16 - By front panel or mouse:

QSTD2400 Series DVR User’s Manual 19 3.4 Playback This unit supports time search and event search. It displays full screen or 4 screens in playback.

Page 17 - Change password:

Digital Video Recorder User Manual 20 STEP3 This unit has full screen and 4 screen playback. Select the screen display mode and the channels. STEP4

Page 18 - Add & Delete users:

QSTD2400 Series DVR User’s Manual 21 3.5 Backup & Viewing This unit supports backup to built-in SATA DVD Writer (optional equipment), or

Page 19 - 3.3 Recording

Digital Video Recorder User Manual 22 STEP6 It will show “Backup complete” after finished, as shown below. Check & View: Users can view the ba

Page 20

QSTD2400 Series DVR User’s Manual 23 Fig 3.21 Choose Backup Folder STEP3 Set the date and channels. It will show the recorded video in area with gr

Page 21

Digital Video Recorder User Manual 24 STEP5 DVR supports AVI conversion. Click “Change File to AVI”. The converter will appear. STEP6 Click

Page 22

QSTD2400 Series DVR User’s Manual 25 STEP2 Set protocol, baud rate, address according to the parameters of the speed dome. STEP3 Click Set

Page 23 - 3.4 Playback

QSTD2400 Series DVR User’s Manual iii Table of Contents Table of Contents ...

Page 24 - Event Search:

Digital Video Recorder User Manual 26 STEP6 Click button to save and exit. Press right mouse button to show the control bar. Click PTZ to e

Page 25 - 3.5 Backup & Viewing

QSTD2400 Series DVR User’s Manual 27 CHAPTER 4 Menu Setup Guide 4.1 Menu Navigation Menu Option Menu Option Basic Device name & ID Video forma

Page 26 - Check & View:

Digital Video Recorder User Manual 28 4.2 Main Menu Setup Click right mouse, or press ENTER button on the front panel, the control bar will show on t

Page 27

QSTD2400 Series DVR User’s Manual 29 4.2.1 Basic Configuration Click BASIC to enter Basic Configuration shown as Fig. 4.4. Basic Configuration F

Page 28 - 3.6 PTZ Control

Digital Video Recorder User Manual 30 Camera name: Set camera name. It can be a combination of numbers, letters and symbols. Show name: Display camera

Page 29

QSTD2400 Series DVR User’s Manual 31 Video quality: There are five options from lowest to highest. The higher the value is, the clearer th

Page 30

Digital Video Recorder User Manual 32 4.2.5 Alarm Configuration Click ALARM to enter Alarm Configuration shown as Fig 4.9 Alarm Configuration. Fig 4

Page 31 - Menu Setup Guide

QSTD2400 Series DVR User’s Manual 33 4.2.6 Motion Configuration Click MOTION to enter Motion Configuration as Fig 4.11 Motion Configuration. Fig 4.1

Page 32 - 4.2 Main Menu Setup

Digital Video Recorder User Manual 34 4.2.7 Network Configuration Click NETWORK to enter Network Configuration shown as Fig 4.13 Network Configura

Page 33

QSTD2400 Series DVR User’s Manual 35 Fig 4.14 DDNS Configuration Server: Select DDNS server. User name and Password: Input account information. This

Page 34

QSTD2400 Series DVR User’s Manual iv CHAPTER 5 Managing the DVR...38 5.1 Formatting

Page 35

Digital Video Recorder User Manual 36 4.2.8 P.T.Z Configuration Click P.T.Z to enter PTZ Configuration as Fig 4.16 PTZ Configuration. Fig 4.16 PTZ C

Page 36

QSTD2400 Series DVR User’s Manual 37 4.2.9 User Configuration Click USER to enter User Management interface shown as Fig 4.18 User Configurati

Page 37

Digital Video Recorder User Manual 38 CHAPTER 5 Managing the DVR 5.1 Formatting Hard Drives If you want to record, it is necessary to forma

Page 38

QSTD2400 Series DVR User’s Manual 39 Notice: If a “no device” or “no file” error appears, it is possible that the USB device is inc

Page 39

Digital Video Recorder User Manual 40 STEP3 Click System, the window below will display. Check firmware version, recording parameters here. Fig 5.4

Page 40

QSTD2400 Series DVR User’s Manual 41 STEP1 Press right mouse button to show the control bar. Click Menu---->Status---->Events, the win

Page 41

Digital Video Recorder User Manual 42 5.7 Locking & Deleting Files Users can control all video files, including locking and deleting th

Page 42 - CHAPTER 5 Managing the DVR

QSTD2400 Series DVR User’s Manual 43 CHAPTER 6 Remote Surveillance 6.1 Accessing the DVR Remotely To view remotely the DVR must have the network con

Page 43 - 5.3 Loading Default Setup

Digital Video Recorder User Manual 44 Notice: If you use a HTTP port other then 80, you need to add the port number after the IP address. For exampl

Page 44 - 5.5 Checking System Log

QSTD2400 Series DVR User’s Manual 45 6.2 Remote Preview When you connect you will see remote preview interface as shown below: Fig 6.2 Remote Previ

Page 45

QSTD2400 Series DVR User’s Manual 1 CHAPTER 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed especially for CC

Page 46

Digital Video Recorder User Manual 46 Snap pictures: STEP1 Click on a channel to select it. Click the button, a window will appear as in Fig 6.3 Pre

Page 47

QSTD2400 Series DVR User’s Manual 47 PTZ control: Click P.T.Z to enter the window shown below. Click on the Speed Dome’s channel to select

Page 48

Digital Video Recorder User Manual 48 Set cruise: Select this function to set cruise path, the window below will appear: Fig 6.6 Set Cruise Clic

Page 49 - 6.2 Remote Preview

QSTD2400 Series DVR User’s Manual 49 This DVR supports remote time search, event search and one channel playback. The above is the default

Page 50 - Color adjustment:

Digital Video Recorder User Manual 50 Using event search: STEP1 Click Event search, the window below will display: Fig 6.9 Remote Event Search STEP2

Page 51 - PTZ control:

QSTD2400 Series DVR User’s Manual 51 STEP4 Click Backup to do remote backup. It will show the progress on the bottom of the screen as shown below:

Page 52

Digital Video Recorder User Manual 52 6.5 Remote DVR Management 6.5.1 Checking System Log Remotely Users can check system log remotely. For the deta

Page 53 - Using time search:

QSTD2400 Series DVR User’s Manual 53 6.5.2 Lock & Delete Files Remotely Users can lock and delete video files through a network. For the details

Page 54 - Using event search:

Digital Video Recorder User Manual 54 CHAPTER 7 Mobile Surveillance This DVR supports mobile surveillance by PDA or smart phones with WinCE and Symbi

Page 55

QSTD2400 Series DVR User’s Manual 55 STEP5 PCam will be opened after it is installed. STEP6 Input the server’s address, ID, and password

Page 56 - 6.5 Remote DVR Management

Digital Video Recorder User Manual 2 ALARM • 4/8/16 channel alarm input and 4 channel alarm output available depending on model. • Supports schedule f

Page 57

Digital Video Recorder User Manual 56 7.2 Accessing by Phones with Symbian Please use the smart phones with Symbian versions supported by this unit.

Page 58

QSTD2400 Series DVR User’s Manual 57 STEP6 Run SCam program. STEP7 Click Options--->Settings to enter login interface. STEP8 Input the publ

Page 59

Digital Video Recorder User Manual 58 Appendix A FAQ Q1. Why doesn’t the DVR start after connecting the power? a. The adapter may be damaged. Please

Page 60

QSTD2400 Series DVR User’s Manual 59 Q6. The mouse is not working, what could be the problem? a. Wait 5 minutes after mouse is connected. b. Mouse may

Page 61

Digital Video Recorder User Manual 60 Enable all the sub options under “ActiveX controls and plug-ins” Then click ok to finish setup. b. Anti-

Page 62 - Appendix A

QSTD2400 Series DVR User’s Manual 61 Q9: Why doesn’t the mouse work when inserted into the front USB jack? The front USB jack is only for backup to fl

Page 63

Digital Video Recorder User Manual 62 Appendix B Instructions for the Installation of Ext

Page 64

QSTD2400 Series DVR User’s Manual 63 . Connection of normal E-SATA hard drive If connecting normal hard drive, please refer to Fig B-2. Its operation

Page 65

Digital Video Recorder User Manual 64 Appendix C Calculating Recording Capacity Users can calculate the size of hard drive needed according

Page 66 - Appendix B

QSTD2400 Series DVR User’s Manual 65 For 16-channel DVR: Total Recoding capacity =112.5(mb/h) X 24(hours/day) X30(days) X16(channels)

Page 67

QSTD2400 Series DVR User’s Manual 3 CHAPTER 2 Hardware Installation Notice: Check the unit and the accessories after receiving the DVR. Please disco

Page 68 - Appendix C

Digital Video Recorder User Manual 66 Appendix E DVR Specifications For QSTD2404 4-channel DVR Compression format St

Page 69 - Compatible Devices

QSTD2400 Series DVR User’s Manual 67 Appendix F DVR Specifications For QSTD2408 8-channel DVR Compression format

Page 70 - Appendix E

Digital Video Recorder User Manual 68 Appendix G DVR Specifications For QSTD2416 16-channel DVR Compression format Sta

Page 71 - Appendix F

QSTD2400 Series DVR User’s Manual 69 Q-SEE PRODUCT WARRANTY Thank you for choosing our products. All of our product users have a conditional free wa

Page 72 - Appendix G

Digital Video Recorder User Manual 70 Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-mail

Page 73 - Q-SEE PRODUCT WARRANTY

QSTD2400 Series DVR User’s Manual 71 If you have questions: Contact Us: Mailing Address:

Page 74 - Customer Information Card

Digital Video Recorder User Manual 4 2.2 Front Panel The Front Panel Layou

Page 75 - If you have questions:

QSTD2400 Series DVR User’s Manual 5 2.3 Rear Panel 2.3.1 Rear Panel Layout The Rear Panel Layout for 8 Channel DVR is shown as Fig 2.4 Rear

Commentaires sur ces manuels

Pas de commentaire